DIY: How-to Quick Router Guide

RouterPic2

Hard to tell when and where an oversize circle might come in handy!

In a previous episode an oversize plywood circle was easily
cut with nothing more than a table saw.

CLICK LINK HERE

Today watch as a router pivot guide made from scrap wood is
used to cut a circle and a hole simultaneously!

There are all manner of complicated router guides – both shop
made or commercially sold- but truth be told a perfectly
functional guide can be made in minutes with a piece of scrap
wood and two holes drilled the proper distance apart.

Set up your router with a template bushing and a fluted bit
and your hole AND circle will be cut in a few quick minutes!

About these ads

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 35 other followers

%d bloggers like this: