A DIY no frill cabinet shelf pull out.
Back in the good ole days before fancy wire baskets and dovetail joint trays,
plywood was the material of choice to make cabinet pull out shelves.
Yup! This was some kind of fancy!
With ordinary plywood a 31 inch wide shelf can easily support any number
of heavy pots and pans.
Hardly gets anymore straightforward than this.
3/4 inch plywood shelf cut to size attached with two side drawer glides and a front
edge of clear pine.
The visible surface can be covered with vinyl shelf liner, 1/8 inch melamine masonite, FRP,
or even Formica.
Melamine masonite liner.